ALL SCI-FI Forum Index ALL SCI-FI
The place to “find your people”.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Forbidden Planet C-57D Space Cruiser

 
Post new topic   Reply to topic    ALL SCI-FI Forum Index -> Sci-Fi Models and Dioramas
View previous topic :: View next topic  
Author Message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Aug 16, 2021 12:35 pm    Post subject: Forbidden Planet C-57D Space Cruiser Reply with quote

Got this kit about 5 years ago. It's the small 1/144 scale kit of the C-57D space cruiser which Polar Lights produced in 2013.
Measuring 12 inches in diameter, it's a decent size while still being small enough to fit on most shelves or bookcases...

Box art. Beautiful work by the artist:


Forbidden Planet C-57D - WIP- Box Top by Steve J, on Flickr


Forbidden Planet C-57D - WIP- Box Bottom by Steve J, on Flickr

I guess if they think a 10 year old could build this, I can too. The key to this build, IMO, is getting a perfectly even and smooooooooth finish.
Expect plenty of wet sanding/polishing between layers of metallic silver.

Not many parts to play with which is fine with me after the marathon I went thru with the Enterprise E.
This is the smaller of the two C-57D model kits issued by Polar Lights:


Forbidden Planet C-57D - WIP- Not Many Parts by Steve J, on Flickr

Fairly simple instructions. Not sure how long these plastic leaf springs are going to last that allow you to open and close the three ramps underneath:


Forbidden Planet C-57D - WIP- Instructions by Steve J, on Flickr

Krylon Metallic Silver primer and paint all in one:


Forbidden Planet C-57D - WIP- Krylon Metallic Silver and Dome by Steve J, on Flickr

I had already primed the upper dome with Krylon gloss black before I got this so will continue priming with gloss black so the overall hull color is uniform. Multiple light coats it says. I was able to get a blemish free coat after sanding with 2400 grit sanding film before the final coat.
I try to spray early enough in the morning before it gets breezy. It helps keep anything the wind might carry along from landing on my just sprayed model.

Lower saucer half sprayd with Black Krylon craft lacquer. Gives a beautiful high gloss surface for the finish coat of silver.
Wet sanded with 2400 grit (I think) polishing film before spraying the final coat:


Forbidden Planet C-57D - WIP- Lower Saucer Primed by Steve J, on Flickr

Ramp hallways:


Forbidden Planet C-57D - WIP- Hallway Painted Silver and Unmasked by Steve J, on Flickr

I taped the edges before painting to keep the Krylon Metallic Silver paint off as these are gluing surfaces. They have since gotten another coat.

LED's for ramp hallway lighting as I will be building the landed version of the model:


Forbidden Planet C-57D - WIP - Lighting by Steve J, on Flickr

Sprayed the ramps with two coats of Krylon Metallic Silver. Will need a few more coats before they are done:


Forbidden Planet C-57D - WIP- Ramp Housings and Ramps by Steve J, on Flickr

The lower saucer got her first few coats of silver followed by a wet sand with fine sanding films.
I got out a few bits of detritus that must have floated in on the light breeze. She's ready for more coats now:


Forbidden Planet C-57D - WIP- Wet Sanding Silver Coat by Steve J, on Flickr





Last edited by trekriffic on Mon Aug 16, 2021 12:37 pm; edited 1 time in total
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Aug 16, 2021 12:36 pm    Post subject: Reply with quote

Three ramps:


Forbidden Planet C-57D - WIP- Three Landing Ramps by Steve J, on Flickr


I'm happy with the external silver face or underside of the ramps. For the conveyor belt I masked off the black primer coat before spraying the rest with silver. The conveyor belt was later sprayed with Krylon dark grey primer which is a medium grey.

This is after about 6 coats of metallic silver with sanding and buffing in between:


Forbidden Planet C-57D - WIP- Saucer Parts Silver by Steve J, on Flickr

I'll give everything a light wet sanding with the 8,000 and 12,000 polishing sheets as the surface is a just a tiny bit rough to the touch. I could probably leave it as is but the light going over will give the saucer a smoother feel.

After laying down sections of Tamiya masking tape and laying some brown paper over the rest of the saucer top I sliced along the recessed line of the inside edge of the outer, darker ring using a sharp exacto knife. Then I peeled the tape away from the edge. Looks good. Ready for spraying:


Forbidden Planet C-57D - WIP- Painting the Ring by Steve J, on Flickr

Hallway glued in:


Forbidden Planet C-57D - WIP- Hallway Glued In by Steve J, on Flickr

The leaf springs were inserted into slots in the sides of the ramp hallways (no glue as they need to flex and move) and the housings were glued into the lower saucer half with the struts in the closed position. The instructions said to make sure the inside end of the housings were glued strongly before trying to operate the struts.

You can see how the leaf springs will flex when the struts are pulled down allowing the pointed peg to travel forward and lock into place on the other side of the spring's bulge:


Forbidden Planet C-57D - WIP- Strut Opening Mechanism by Steve J, on Flickr

All three ramps operate perfectly. It helps to pull the ramps open if you have at least one longer fingernail to slide under the lips at the end of the ramps and pry. They really snap into position on their own at a certain point as they open. They also snap shuT:


Forbidden Planet C-57D - WIP- Ramps Installed and Open by Steve J, on Flickr

This is after about 4 coats of Krylon Metallic Dark Metal over the metallic silver. I'll leave the masking in place for now. After she dries I'll remove the masking and drill some holes for installing cool white LEDs to light the hallways:


Forbidden Planet C-57D - WIP- Metallic Dark Metal Ring by Steve J, on Flickr

Epoxy putty was used to strengthen the ramp hallway to hull joints against the strains imposed by the leaf spring mechanisms during lowering and raising of the ramps:


Forbidden Planet C-57D - WIP- Epoxy Putty by Steve J, on Flickr

As I am not using the circular lower core engine cage, the center mounting tube was unnecessary. Removing it with my Dremel tool gives me room to place a 9 volt battery in the lower dome:


Forbidden Planet C-57D - WIP- Tube Removal by Steve J, on Flickr

Since I am building the landed version of this ship the lower dome was painted metallic silver over a coat of black. I glued the landing pedestal to the center of the dome with 5 minute epoxy:


Forbidden Planet C-57D - WIP- Lower Dome and Pedestal by Steve J, on Flickr

More to come...
Back to top
View user's profile Send private message
Bud Brewster
Galactic Fleet Admiral (site admin)


Joined: 14 Dec 2013
Posts: 17019
Location: North Carolina

PostPosted: Mon Aug 16, 2021 1:50 pm    Post subject: Reply with quote

________________________________

Gosh, Steve, when you finish that lovely model I'll bet it would look great on my mantle, right below my Captain Power ships!

The mantel is a bit crowded, but with some creative rearranging I'm sure I could fit it in beautifully. Gee, what a wonderful birthday present it would make! Very Happy

And just guess what today is! Cool




_________________
____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958)
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Aug 16, 2021 2:26 pm    Post subject: Reply with quote

Those Captain Power ships are cool! The robots are nice too.

Happy Birthday Bud!






Very Happy
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Tue Aug 17, 2021 11:32 pm    Post subject: Reply with quote

Battery test fit…

There’s just enough room to accommodate the battery:


Forbidden Planet C-57D - WIP- Battery Test Fit by Steve J, on Flickr

Plenty of room in the lower dome for the battery:


Forbidden Planet C-57D - WIP- Lower Dome Test Fit with Battery by Steve J, on Flickr

A slot was carved out between where the sidewalls of one of the ramp hallways will butt up against the curved walls of the central core section centered beneath one of the holes I drilled out for the three hallway LED’s:


Forbidden Planet C-57D - WIP- Power Switch Slot by Steve J, on Flickr

A box to hold the 9 volt battery was built using styrene sheet:


Forbidden Planet C-57D - WIP- Battery Box Construction by Steve J, on Flickr


Forbidden Planet C-57D - WIP- Completed Battery Box by Steve J, on Flickr

Two short strips of Velcro were epoxied to each side of battery box hook side out. A longer strap stretches across the box hook side down to hold the battery in place:


Forbidden Planet C-57D - WIP- Velcro Strap by Steve J, on Flickr

The battery box sits down inside the lower dome and fits inside the lower saucer with ease:


Forbidden Planet C-57D - WIP- Battery Box Test Fit by Steve J, on Flickr

The slide switch is accessed by opening a landing ramp. The back wall of the hallway was painted with light tam enamel which I later repainted using neutral grey:


Forbidden Planet C-57D - WIP- Switch Access by Steve J, on Flickr

Prior to permanent installation the battery switch was tested to make sure the slot was the correct width and length:


Forbidden Planet C-57D - WIP- Slide Switch Test Fit by Steve J, on Flickr

The battery clip wires were trimmed and soldered to a quick disconnect clip:


Forbidden Planet C-57D - WIP- Battery Harness Soldering by Steve J, on Flickr
Back to top
View user's profile Send private message
Bud Brewster
Galactic Fleet Admiral (site admin)


Joined: 14 Dec 2013
Posts: 17019
Location: North Carolina

PostPosted: Wed Aug 18, 2021 10:03 am    Post subject: Reply with quote

________________________________

"In the third decade of the 21st century, a man in California built the starship Enterprise with more custom enhancements than all the tribbles in the grain bin.

By 2021 AD he finished that project, after which he reached out for a bold new challenge.

Almost at once he discovered another starship kit, one which also used hyperdrive (through which the speed of light was first achieved, and later greatly surpassed).

And so at last, Trekriffic began the redesign and customized assembly of United Planets Cruiser C-57-D, now more than a month out the box, and soon to be on a special mission to the great main sequence star . . . Altair!" Cool




_________________
____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958)
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Thu Dec 01, 2022 11:44 am    Post subject: Reply with quote

Final images...




Forbidden Planet C-57D - Finished by Steve J, on Flickr




Forbidden Planet C-57D - Finished by Steve J, on Flickr




Forbidden Planet C-57D - Finished by Steve J, on Flickr




Forbidden Planet C-57D - Finished by Steve J, on Flickr




Forbidden Planet C-57D - Finished by Steve J, on Flickr
Back to top
View user's profile Send private message
tmlindsey
Mission Specialist


Joined: 18 Jul 2022
Posts: 409
Location: NW Florida

PostPosted: Thu Dec 01, 2022 2:35 pm    Post subject: Reply with quote

Stunning!
_________________
"Have you never wondered what it would be like to walk between the ticks and tocks of Time?"
Back to top
View user's profile Send private message Visit poster's website
Gord Green
Galactic Ambassador


Joined: 06 Oct 2014
Posts: 2940
Location: Buffalo, NY

PostPosted: Thu Dec 01, 2022 3:34 pm    Post subject: Reply with quote

I LOVE IT!

Beautiful result from craftsman construction!

_________________
There comes a time, thief, when gold loses its lustre, and the gems cease to sparkle, and the throne room becomes a prison; and all that is left is a father's love for his child.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    ALL SCI-FI Forum Index -> Sci-Fi Models and Dioramas All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group