ALL SCI-FI Forum Index ALL SCI-FI
The place to “find your people”.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Polar Lights Jupiter 2 (1965) from Lost in Space - Rework
Goto page Previous  1, 2, 3  Next
 
Post new topic   Reply to topic    ALL SCI-FI Forum Index -> Sci-Fi Models and Dioramas
View previous topic :: View next topic  
Author Message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Dec 20, 2021 1:40 pm    Post subject: Reply with quote

Alright LIS fans, back with the next installment after some issues with the astrogator sent us somewhere Doctor Smith thought would be nice to visit... not sure I believe him but... anyway, here we go...

The astrogator was redone to be more accurate to the filming miniature.
The original clear dome was cracked, and since I couldn't get a replacement from Polar Lights, I had a new one printed for me by meatloafr.

He sent me several to practice on as I needed to finish the curing, sanding, and polishing steps.

Not the greatest photo but I'll get a better picture once I'm done retouching the paint:


Jupiter 2 - Rework- Astrogator Reworked Parts by Steve J, on Flickr

I added a second ring between the ribs and the base ring using .015 thick styrene sheet trimmed to a width of 2 mm.

I then hand brushed the rings and a few other areas with thick grey primer:


Jupiter 2 - Rework- Astrogator Base Rings Primed by Steve J, on Flickr

I brushed most of the astrogator with a mix of Testors Flat Tan and Light Ivory enamels.

Once it's dry I'll paint over the upper base ring with Light Ivory:


Jupiter 2 - Rework- Astrogator Base Rings Painted by Steve J, on Flickr

Raw materials...

The circular, white course adjustment ring (with black hashmarks) that sits just inside the clear astrogator dome was made from a promotional flexible clear plastic ruler and magnifier I'd had in my stash for years.

I found out that Doctor Smith had used a magnet to drag this ring sideways to a new location thus altering the Jupiter 2's course:


Jupiter 2 - Rework- Astrogator Nav Ring Material by Steve J, on Flickr

Not sure what this was called but there's a photo I have of Will adjusting
some knobs and looking into the visor of what I'd call a stereoscopic viewing scanner.

It's located in the station to the left of the upper deck main hatch, right of the flight deck windows.

I find making a pencil sketch can help to familiarize me with an objects shape before I attempt to construct it in plastic:


Jupiter 2 - Rework- Long Range Viewer Sketch by Steve J, on Flickr

From sketch to plastic...

Pretty happy with how this turned out.

The long range telescope/viewer is made from 12 tiny parts glued together with tiny drops of CA.

It was base painted black then silver using enamels.

The black knobs and visor need a little touching up with the black. I may also paint the base section steel:


Jupiter 2 - Rework- Long Range Viewer Silver Basecoat by Steve J, on Flickr

On to installation...

A hole was drilled using a pinvise into the slanted face of the main communication console to the right of the main view port.

Then I clipped off all but an eighth inch the piano wire embedded in the underside of the Viewer and glued it into the hole with CA:


Jupiter 2 - Rework- Long Range Viewer Installed by Steve J, on Flickr

Just a few small touch ups to do and this station will be finished.

I still need to add red and green dots to some buttons on the long range viewer too:


Jupiter 2 - Rework- Communication Station Decaled by Steve J, on Flickr

Just for a strength check, I assembled the decks inside the hull and held it up about 5 feet off the floor to give the complete model a shake.

The four rare earth magnets holding the upper and lower hull halves together held firmly which was a relief.

Actually, I was 99% sure they would hold but... you never know for sure unless you test it.

The final test, after I finish the lighting, will include at least one, more likely two, 9 volt batteries.

So ... I'm hopeful the magnets will still hold:


Jupiter 2 - Rework- Magnet Strength Test by Steve J, on Flickr

Back soon with more work on the lower deck observation station with it's large viewport and cover.
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Jan 31, 2022 12:10 pm    Post subject: Reply with quote

I've locked Doctor Smith in the engine room for a little while so I can post this update without his interference. I don't think there's anything in there he can mess with; besides, the radiation will do wonders for his pale complexion.

Maureen wasn't sure this was a good idea, but at least Debbie agrees with me . . . I think:


Debbie the Bloop by Steve J, on Flickr

Anyway, here's another update...

I did a sketch on paper to help me construct the interior window and cover of the lower deck observatory:


Jupiter 2 - Rework- Observatory Window Sketch by Steve J, on Flickr

The sketch is based on a page from a schematic in a fan made Operations Manual:


Jupiter 2 - Rework- Page from Jupiter 2 User Guide by Steve J, on Flickr

It appears to be faithful to the full size set design so will need some adjustments to match the much lower profile of the Polar Lights model which strives to match the shape of the filming miniature:

The full size set:


Jupiter 2 - Rework- Show Still by Steve J, on Flickr

The crash doors/covers for the lower observatory window would be made using two layers of Plastruct styrene sheet (dark and light grey) recessed inside an opening cut in .040 styrene sheet:


Jupiter 2 - Rework- Lower Obervatory Crash Door Layers by Steve J, on Flickr

The observatory window cover will be inset within the boundaries defined by the masking tape:


Jupiter 2 - Rework- Observatory Cover Placement by Steve J, on Flickr

The lower window framing was glued in place using narrow styrene channel:


Jupiter 2 - Rework- Crash Doors and Window Framing by Steve J, on Flickr

I cut and trimmed three pieces of thin clear plastic sheet to make the window panes and framed them with more styrene channel:


Jupiter 2 - Rework- Observatory Windows by Steve J, on Flickr

All in all, I'm pretty pleased with how this turned out for the observatory window port and cover:


Jupiter 2 - Rework- Observatory Windows Added by Steve J, on Flickr

Next time I'll show you guys the work done on the upper flight deck main viewport framing and window panels:


Jupiter 2 - Rework- Framing Added by Steve J, on Flickr

Guess I should release Doctor Smith no... oh... wait... there he is now.

I guess Will must have let him out?

Oh dear... he seems a wee bit peeved with me.


Doctor Smith by Steve J, on Flickr

I better tell him how "tanned" he looks. He'll forgive almost anything if you appeal to his vanity!


Last edited by trekriffic on Sat Feb 05, 2022 1:10 pm; edited 3 times in total
Back to top
View user's profile Send private message
Bud Brewster
Galactic Fleet Admiral (site admin)


Joined: 14 Dec 2013
Posts: 17017
Location: North Carolina

PostPosted: Mon Jan 31, 2022 1:10 pm    Post subject: Reply with quote

________________________________


Incredible images! Remarkable craftsmanship!

Steve, while looking at your recent gallery of amazing photos and the detailed descriptions of the assembly, I had one of my typically brilliant ideas! Cool

Wouldn't it be great if someone created a "build montage video" that showcased the incredible amount of work you do to prepare, and the assembly of all the parts!

It would be like a much longer version of the one in This Isand Earth during the construction of the interocitor — a series of tightly edited closeups similar to your pictures, with jazzy music!

I couldn't find a clip from the theatrical version, but here's a jokey one from MST3K just to illustrate my point. Very Happy


_________________ INTEROCITY MONTGAGE!


__________



__________
_________________
____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958)
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Feb 07, 2022 1:42 pm    Post subject: Reply with quote

Moving along now to the main viewport...

I built out the plastic framing for the viewport so the hull will mate up perfectly to the walls and control console
in the upper floor with no visible gaps:


Jupiter 2 - Rework- Framing Added by Steve J, on Flickr

I ended up adding Plastruct and Evergreen to the top, bottom, and sides of the main window port.
Then I brushed with Testors Light Ivory:


Jupiter 2 - Rework- Interior of Reframed Viewport in Upper Hull by Steve J, on Flickr

After a few hours of trimming and tweaking and test fitting I'm satisfied with the fit of the panes to the frames.
I'll remove the protective plastic film from the plastic windows once they are glued in place after the hull is painted its final color:


Jupiter 2 - Rework- Window Test Fit by Steve J, on Flickr

The main upper hull viewport will have these three clear panes cut from .015 clear styrene. The two central support frames will go on last, inserted between the panes from the front, after the panes are glued into the framing around the inside of the viewport opening:


Jupiter 2 - Rework- Main Window Panes and Center Pillars by Steve J, on Flickr

I used AVES Apoxy sculpt and Plastruct sheet to add an upper brow at close to a right angle to the slope of the sides of the viewport. This more closely matches the angle of the large scale exterior set:


Jupiter 2 - Rework- Upper Window Recontouring by Steve J, on Flickr

The profile looks much better using the epoxy putty and a thin arced section of plastic sheet to add the "brow":


Jupiter 2 - Rework- Main Viewport Brow Profile by Steve J, on Flickr

After two to three coats of Mister Surfacer 1000 with sanding in between. Feels very smooth now:


Jupiter 2 - Rework- Main Viewport Mister Surfacer by Steve J, on Flickr

Uh oh! The robot is going off about "Danger! Danger!" again!
John and Don have put the Jupiter into a steep tilt and turn to avoid a meteor shower which,
oddly enough, takes us to the next thing to work on... the galley ...

I added the round cereal containers on the right side and the rows of seed canisters (5 rows of 6 canisters) to the left:


Jupiter 2 - Rework- Galley Right Wall by Steve J, on Flickr

I made the 8 half round bins above the grain containers and painted them gummetal.
I need to glue the table down to the floor:


Jupiter 2 - Rework- Galley Left Wall and Table Test Fit by Steve J, on Flickr

Table was glued down with epoxy. Decaling for the dining room/galley were applied to the table and walls. Still may add a few to the right wall to the right of the round containers:


Jupiter 2 - Rework- Galley Decals by Steve J, on Flickr

Next up is some work on those lit panels above the counters in the laboratory and observatory.
For now just sit tight and ignore Doctor Smith's wailing for help. He's locked himself in the space pod bay again but he'll be fine right?


Rolling Eyes
Back to top
View user's profile Send private message
Bud Brewster
Galactic Fleet Admiral (site admin)


Joined: 14 Dec 2013
Posts: 17017
Location: North Carolina

PostPosted: Mon Feb 07, 2022 6:19 pm    Post subject: Reply with quote

________________________________

Fantastic work, sir! Very Happy

I have to ask this, Steve. Do you spend just as much time making those beautiful photos and writing your detailed descriptions of your work as the many hours you spend on the model itself? Confused

Frankly it looks like it might take even MORE time to create your posts!

So, my second question is: Do you ever sleep!? Shocked

_________________
____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958)
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Mon Feb 07, 2022 7:52 pm    Post subject: Reply with quote

Bud Brewster wrote:
Fantastic work, sir! Very Happy

I have to ask this, Steve. Do you spend just as much time making those beautiful photos and writing your detailed descriptions of your work as the many hours you spend on the model itself? Confused

Frankly it looks like it might take even MORE time to create your posts!

So, my second question is: Do you ever sleep!? Shocked

Good questions. Time spent modeling is hard to determine as time seems to stand still sometimes when a modeler is in the “zone”.

As to sleep… a little bit when the cats let me.
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Wed Feb 16, 2022 3:45 pm    Post subject: Reply with quote

Well looks like were heading for a red giant star so keep your fingers crossed this only ends up being a big red bag of roiling gas...
OK. Here we go! IMPACT!!!

Whew! We got lucky!
Guess I'll be able to finish this update after all.

I made the black framed white panels (2 sets of 3 panels) that run along the tops of the side walls
of the lower deck observatory using black styrene sheet and white decal film:


Jupiter 2 - Rework- Observatory Panels by Steve J, on Flickr

I wanted the lab's back wall panels to be a light blue color to match the show, unlike the aftermarket decals which are a dark grey, as shown on the right in this photo. Rather than try to paint the panels I used some white decal film and painted it the proper shade of light blue.
After it dried I cut out four rectangular panels to fit inside the black borders of the existing decals, as you can see to the left in the photo:


Jupiter 2 - Rework- New Lab Panel Decals by Steve J, on Flickr

I made a simple box for the 9V battery that powers the LEDs in the lower projector ring and wired it to a push-button switch I transplanted from a cheap Harbor Freight donor flashlight. The switch is mounted directly above one the holes for the landing gear struts with the button facing down. Inserting a toothpick into the hole from below allows one to push the button and turn the lights on and off. The hole still accommodates the landing strut peg when the switch is not in use of course:


Jupiter 2 - Rework- Battery and Switch Installation by Steve J, on Flickr

Before applying the flight deck console decals I filled the molded recessed panels with AVES.
Will get a light sanding then some light tan and silver paint.
I am considering installing a warm white LED strip above about where the pilot seats will be glued in using a panel made
of light grey Plastruct strip. It will point at an angle downward and back into the ship.
This will prevent glare on the windows from inside. I'll do a light test using a 9V battery before I glue everything in.
I'll also need to figure out how to run the wires from the strip over or thru the wall and down to the battery:


Jupiter 2 - Rework- Consoles Puttied and Overhead LED Strip by Steve J, on Flickr

The LED strip fits into a slot in the panel over the flight deck. I don't think I'll have any clearance issues between the upper hull and the strip:


Jupiter 2 - Rework- LED Lighting Profile Check by Steve J, on Flickr

I'll power up the LED strip and see how it looks. Assuming all goes well I'll cover the LED opening with a rectangular cover cut from a piece of milk jug plastic to help diffuse the light:


Jupiter 2 - Rework- LED Lights Over Flight Deck from Inside by Steve J, on Flickr

Panel cut to fit at an angle above one of the three sections along the top of the cryo tube wall between the ceiling supports.
A piece of milk jug plastic was trimmed to fit over the slot cut for the LED strip that will sit flush in the slot
above the panel facing downward into the ship over the tubes. Needs a little more cleanup along the slot:


Jupiter 2 - Rework- Light Panel for Over Cryo Tubes by Steve J, on Flickr

Still mulling over how many of these panels to make for the three sections of Cryo Tube wall panels.
What I plan on doing is running three to five LED strips off the 9V battery and see how bright they are.
I'd like to have at least three strips to light the upper deck interior.
If the battery can handle five I could light the entire cryo tube wall, the flight deck, and the computer wall. If not, I'll light the center section of the cryo tube wall, the flight deck, and the computer wall.
I'm sure the battery will handle three strips at 20ma each since the battery that powers the engines can handle a 60ma draw:


Jupiter 2 - Rework- Cryo Tube Wall Lighting by Steve J, on Flickr

I think I can get away with lighting just the flight deck, stasis tube, and computer wall sections as laid out in this photo.
There should be enough light bounce off the glossy floor to illuminate the back wall.
If not, I will see if the battery can handle lighting any of the other wall sections before I add any additional LED's:


Jupiter 2 - Rework- Lighting Panels by Steve J, on Flickr

Next Up:

Jupiter 2 - Rework- Finished Shaping Elevator Yoke by Steve J, on Flickr
Back to top
View user's profile Send private message
Bud Brewster
Galactic Fleet Admiral (site admin)


Joined: 14 Dec 2013
Posts: 17017
Location: North Carolina

PostPosted: Wed Feb 16, 2022 6:19 pm    Post subject: Reply with quote

trekriffic wrote:
Good questions. Time spent modeling is hard to determine as time seems to stand still sometimes when a modeler is in the “zone”.

As to sleep… a little bit when the cats let me.

Ah-ha! Now I get it. You only need to take "cat naps"! Very Happy

I'm surprised I didn't figure that out on my own. Rolling Eyes

Being a dedicated writer by nature, I had a fun thought today while looking at your latest update. Here is is.
____________________________________________

Imagine dozens of alien spacecraft in orbit, effectively cloaked so that we here on Earth can't detect them while they study human civilization in every way they can — using telescopes, radio receivers, digital transmissions, etc.

Hundreds of aliens are assigned to "monitoring stations" which receive data from Earth. One of these monitoring stations stumbles across the internet exchanges here on All Sci-Fi.

This intelligent and imaginative little creature from another world becomes entranced by our lively exchanges, and soon he's hooked on All Sci-Fi's discussions, debates, and artistic creations — like my own AND the amazingly detailed descriptions of Trekriffic's models!

In the interest of better understanding Earth's culture, the little alien requisitions the materials and tools he needs to duplicate Trekriffic's step-by-step instructions on how to build miniature replica's of advanced starships! Very Happy

Following Trekriffic's detailed posts, the little alien constructs exact duplicates of his models. His own beautiful creations dazzle his fellow alien friends . . . same way they do us here on All Sci-Fi.

Eventually the alien High Command is made aware of the little aliens creations — and how they were based on the brilliant work a lone human who constructed detailed replicas of advanced technology which mankind did not possess! Shocked

Shocked by the implications of this revelation, the alien race gains a new respect for humankind, and they increase their efforts to learn just how much more advanced we might be than they previously suspected! Shocked

_________________
____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958)
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Fri Mar 25, 2022 5:28 pm    Post subject: Reply with quote

Time for an update LIS fans...

I wanted the inboard faces of all the upper deck ceiling support beams to appear lit so I ended up using .125" wide Evergreen strip to make the the lighting "bands":


Jupiter 2 - Rework- Ceiling Support Strips by Steve J, on Flickr


Jupiter 2 - Rework- Ceiling Supports Faux Lighting by Steve J, on Flickr

This was a very clean solution to making the inward faces of the ceiling beams appear to be lit:


Jupiter 2 - Rework- Ceiling Support Faux Lighting Strips by Steve J, on Flickr

I removed the kit molded half round cylinders from the wall to the left of the space pod hatch:


Jupiter 2 - Rework- Cylinder Removal by Steve J, on Flickr

Photos of this area of the LIS studio set showed brackets holding three red cylinders (fire extinguishers?) The cylinders I made were hollow Evergreen tubes and filled with AVES epoxy putty before insertion of three metal pins that I had filed flat on their sides:


Jupiter 2 - Rework- New Cylinders and Brackets by Steve J, on Flickr

The elevator control yoke was painted with a brush using aluminum enamel, then decaled before being glued in place using Testors tube glue:


Jupiter 2 - Rework- Elevator Control Yoke Decaled by Steve J, on Flickr

I added the decals to the computer wall.:


Jupiter 2 - Rework- Computer Wall Decaled by Steve J, on Flickr

I decided to move the porthole to the right (viewed from the outside) of the main hatch. It just did NOT line up with the alcove inside the model so I resolved to drill and auger out a new hole in the correct location:


Jupiter 2 - Rework- Relocating Porthole by Steve J, on Flickr

The old porthole was filled in with AVES Apoxy Sculpt:


Jupiter 2 - Rework- Old Porthole Filled In by Steve J, on Flickr

I need to spray the landing gear with gloss black Kryon before spraying with Krylon Aluminum and needed something to hold each leg as I sprayed it. The heads of these nails match up perfectly with the magnets in the top the landing legs:


Jupiter 2 - Rework- Landing Gear Paint Prep-Nails by Steve J, on Flickr

More to come!
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Fri Mar 25, 2022 5:41 pm    Post subject: Reply with quote

Gloss black Krylon acrylic lacquer is sprayed onto the three landing struts:


Jupiter 2 - Rework- Three Landing Legs Primed Black by Steve J, on Flickr

Photo of the upper deck elevator cage with scratch made control yoke:


Jupiter 2 - Rework- Finished Upper Deck Elevator Cage by Steve J, on Flickr

The porthole and main viewport were brushed with thick primer then sanded to smoothness:


Jupiter 2 - Rework- Brushing on Mister Surfacer Around Viewports by Steve J, on Flickr

The lousy kit molded on cylinders were replaced with three red cylinders made from scratch.
The door to the right will get some additional light sanding to smooth out the rough finish:


Jupiter 2 - Rework- New Wall Cylinders and Brackets by Steve J, on Flickr

I decided to add detail to the upper deck alcove between the communications station and the main hatch. First off I drew the door to the armory room (which is in the lefthand wall of the alcove) on thin styrene sheet:


Jupiter 2 - Rework- Armory Doors by Steve J, on Flickr

I used a small drill in a pinvise to drill out the panels for the doors. Then I carved, filed, and sanded until it looked right:


Jupiter 2 - Rework- Armory Dooray Drilled and Carved Out by Steve J, on Flickr

I wanted to add a few fire extinguishers to both decks. This one will go in the armory alcove where various crew members have been seen standing and gazing out thru the round porthole there occassionally.:


Jupiter 2 - Rework- Fire Extinguisher by Steve J, on Flickr

The checkerboard panels in the communications station just look wrong. I will make some corrected panels to glue on over them. I do love how the two round photo-etch tin (?) speakers look though. They were leftovers from my '66 Batmobile build. The armory doors were painted and glued in place with 5 minute epoxy:


Jupiter 2 - Rework- Armory Doors and Comm Station by Steve J, on Flickr

These three tanks hang in a row on the left side of a short wall under the round porthole in the alcove between the main airlock and the comms station which is to the right of the upper flight deck station. I'l paint them metallic aluminum:


Jupiter 2 - Rework- Tanks for Armory Alcove by Steve J, on Flickr

The battery that powers the upper deck LED’s was installed in the lower hull and tied to a push button switch. A quick power disconnect harness was soldered to the battery wires:


Jupiter 2 - Rework- Battery for Upper Deck Lights by Steve J, on Flickr

That's all for now folks! Stay the course and stay tuned!
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Sun Mar 27, 2022 3:05 pm    Post subject: Reply with quote

Continuing on our journey which I really feel is coming to a successful conclusion
very soon now that Doctor Smith has been jettisoned from the airlock... accidentally...

The fire extinguisher in its place on the right hand wall of the alcove:


Jupiter 2 - Rework- Armory Alcove Fire Exinguisher by Steve J, on Flickr

The flight deck got its decals:


Jupiter 2 - Rework- Flight Console and Computer Decals by Steve J, on Flickr

Once completed these panels will be glued in place over the red, yellow, and white checkerboard decals I installed previously in the communicatrions station:


Jupiter 2 - Rework- New Panels for Comm Station by Steve J, on Flickr

Five panels will be lit with warm white LED tape. Three panels will not be lit. The 5 sections each power 3 SMD LEDs drawing 20 mA from the 9 volt battery for a total of 100 mA:


Jupiter 2 - Rework- Upper Deck Lighting Panels Atop Wall Sections by Steve J, on Flickr

I decided to add some detail to the upper deck ceiling. This took a few days, mostly from waiting for paint to dry...

The round hub in the center was made by cutting the top off a battery powered tea light candle I got at the craft store.
The ceiling support beams are made from 20 mm thick Evergreen strips:


Jupiter 2 - Rework- Ceiling Beams and Central Hub by Steve J, on Flickr

The ceiling beams were painted with Model Master Intermediate Blue enamel:


Jupiter 2 - Rework- Ceiling Beam Masking and Paint by Steve J, on Flickr

After the Intermediate Blue paint dried I finished the ceiling by gluing white styrene strips to the faces of the ceiling beams using CA:


Jupiter 2 - Rework- Ceiling Beam Light Strips by Steve J, on Flickr

Oh no! A small disaster strikes!

Somehow I knocked off the upper section of the scope I’d made and mounted to the communications station.
It had been glued together using CA glue so I must have bumped it accidentally with a sanding stick while working on the alcove next to it.
The little scope's binocular head must have snapped off and flown off into space, forever wandering the wastes of my garage floor.
Anyway, here you can see the long handled locking tweezers I used to install the replacement for the missing head:


Jupiter 2 - Rework- Comm Station Scope Repair by Steve J, on Flickr

The newly repaired scope and new panels over the photo etch speakers turned out pretty well:


Jupiter 2 - Rework- Comm Station Finished by Steve J, on Flickr

This panels with the red and blue lights look so much better then the checkerboard decals did. And the scope looks better than ever as I corrected a few minor things the second time around:


Jupiter 2 - Rework- Scope and Speakers by Steve J, on Flickr

Next I'll post pics of the finished upper deck lighting. Stay tuned!
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Sun Mar 27, 2022 3:21 pm    Post subject: Reply with quote

There followed lots of soldering fun...

Four of the five light strips were soldered together using black and red 30 AWG solid kynar wire before being installed in the panels over their wall sections using CA. The remaining strip over the computer wall will be soldered to the battery on its own circuit. Care had to be taken to keep the profile of the strips below the tops of the support beams so as not to cause any impingements with the ceiling:


Jupiter 2 - Rework- LED Strip Wiring Almost Done by Steve J, on Flickr

And the lights work. Thank the maker!


Jupiter 2 - Rework- Upper Deck Illumination Test by Steve J, on Flickr

Decided to add one more wall detail to the galley and then I'll call it done...

I made my own “polka dot” panels for the galley using leftover video screen decal material, the dots were made using red, yellow, white, black, and green Testors enamel and a toothpick. Once the paint was dry I cut the decals to fit the square recesses in the wall of the galley. These were then floated into position vertically along the right hand side of the right wall nearest the entrance:


Jupiter 2 - Rework- Polka Dot Panels for Galley Wall by Steve J, on Flickr

Back to the upper deck...

To finish off the look of the wall to ceiling intersection, I added thin strips of styrene to the front edges of the panels over each wall section. These somewhat replicate the soffits that provided recessed lighting along the perimeter of the inner walls. They would be painted Light Ivory to match the color of the walls and ceiling:


Jupiter 2 - Rework- False Soffit by Steve J, on Flickr

Lower projector work...

After saying I was leaving them as as is having painted over them with silver hull paint 20 years ago I changed my mind and decided to scratch off the paint from the lower projector’s lower recessed light "facets". I used a small 45 degree angled xacto knife, files, and sanding sticks to remove layers of silver and black paint:


Jupiter 2 - Rework- Scraping Paint Off by Steve J, on Flickr

Tamiya tape is a must for masking with these small pieces:


Jupiter 2 - Rework- Masking the Projector by Steve J, on Flickr

Astrogator Finished!

I used some leftover black decal material to make the six "star chart" panels around the perimeter. The stars are just dots of silver enamel made with a sharpened round toothpick:


Jupiter 2 - Rework- Astrogator Detailing by Steve J, on Flickr

I just used some leftover decals and brass photo-etch (painted black) for the tiny manual control console's buttons and handle:


Jupiter 2 - Rework- Astrogator Manual Control Console by Steve J, on Flickr

I call the upper deck done. This astrogator dome replaced the original kit dome that cracked when I installed it 20 years ago. I had a friend of mine, who goes by "meatloafr" over on the All Scale Trek forum, print me a new one which I sanded and polished before using a clear UV resistant spray to prevent yellowing. Not perfect but better than having a dome with a big crack on top. I also finished painting the false soffits around the perimeter above each station with light ivory:


Jupiter 2 - Rework- Astrogator and Upper Deck Finished by Steve J, on Flickr

More to come after the exterior hull paint dries.
Back to top
View user's profile Send private message
Bud Brewster
Galactic Fleet Admiral (site admin)


Joined: 14 Dec 2013
Posts: 17017
Location: North Carolina

PostPosted: Sun Mar 27, 2022 4:21 pm    Post subject: Reply with quote

________________________________

Steve, I hope you're not tired of hearing me say that I'm always dazzled by your skills as a photographer, as well as your descriptive powers which detail the meticulous work you do.

You're giving us magnificent views the various component parts you've created — views that are even better than what we'd get if we were in your workshop, peering down at the items on your workbench! Cool

We all understand that as a creative artist you want to share your work with people who appreciated it, It's a need I obviously share, since I created All Sci-Fi as a place where I could display my own literary and artistic creations. Very Happy

Steve, All Sci-Fi is proud to display your work, and we hope you'll continue to do so. Very Happy

_________________
____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958)
Back to top
View user's profile Send private message
trekriffic
Starship Navigator


Joined: 19 Feb 2015
Posts: 593

PostPosted: Tue Mar 29, 2022 5:31 pm    Post subject: Reply with quote

Thanks Bud.
Almost there!

After more sanding and polishing I resprayed the upper hull exterior with Krylon gloss black Colormax spray.
Next I have to wait two days to spray with metallic aluminum:


Jupiter 2 - Rework- Upper Hull Second Black Coat by Steve J, on Flickr

The lower hull was also sprayed with Krylon gloss black.
After a few days I did some cleanup sanding and polishing for a dust free finish.


Jupiter 2 - Rework- Lower Hull Black Coat by Steve J, on Flickr

Days later...

The hull surrounding the lower hull engine projector was masked off in order to spray just the projector with metallic aluminum:


Jupiter 2 - Rework- Lower Hull Exterior Masking by Steve J, on Flickr

After this dries I'll unmask and finish painting the lower hull:


Jupiter 2 - Rework- Projector Silver Coat by Steve J, on Flickr

More days go by...

Not too bad. I'm majorly chuffed with how that seam turned out between the roof and middle hull ring after I joined them.
One spot still bugs me but I may just live with it rather than mess with a superb finish like this one.
Man there was a lot of sanding and polishing to get it to look this good considering the mess it was when I started this redo:


Jupiter 2 - Rework- Upper Hull Silver Coat by Steve J, on Flickr

Getting that seam filled between the uppermost and middle rings of the hull took
a lot of effort and time but I think it was worth it to get a smooth, seamless joint:


Jupiter 2 - Rework- Upper Hull Final Coat by Steve J, on Flickr

I'm fairly satisfied with how the upper deck turned out:


Jupiter 2 - Rework- The Finished Upper Deck with Wiring by Steve J, on Flickr

The proof in the pudding comes when she's all together and lit up.
There should be a lot of light bounce off the floor and the ceiling so even the sections I did not light should not be too dark at all.
And I like that the lights don't shine directly out the windows too so you get a good glare free view into the ship.

Final pic for now...

I added one more speaker in the soffit above the pilot seats.
I also added a speaker to the lavatory in the lower deck above the toilet across from the shower:


Jupiter 2 - Rework- Upper Deck Over the Astrogator by Steve J, on Flickr

More to come as I finish installing the main hatch and the windows.
Back to top
View user's profile Send private message
Gord Green
Galactic Ambassador


Joined: 06 Oct 2014
Posts: 2940
Location: Buffalo, NY

PostPosted: Tue Mar 29, 2022 10:37 pm    Post subject: Reply with quote

I love your attention to detail!
Fabricating the detail pieces is really an art....and yours are amazing! Thank you for sharing !

_________________
There comes a time, thief, when gold loses its lustre, and the gems cease to sparkle, and the throne room becomes a prison; and all that is left is a father's love for his child.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    ALL SCI-FI Forum Index -> Sci-Fi Models and Dioramas All times are GMT - 5 Hours
Goto page Previous  1, 2, 3  Next
Page 2 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group