View previous topic :: View next topic |
Author |
Message |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Tue Apr 03, 2018 3:33 pm Post subject: MPC 1/24 Space 1999 eagle build |
|
|
I've had this kit in my stash since it was released a few years ago. I haven't built an eagle in a while, so it's next up.
As you can see it's a big kit!
The instructions have the build start with the cockpit.
The cockpit is just 2 pilots and a back bulkhead.
While watching the paint dry, I started on the spine. Each side is 2 pieces. I was a bit skeptical about the strength of it, but others who have built it say its very strong.
The tubing has mold lines that need to be sanded off, but the detail is very good. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Wed Apr 04, 2018 4:14 pm Post subject: |
|
|
The center boxes are built and I'm experimenting with pre shading.
![](https://i.imgur.com/SaPLCtnh.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Gord Green Galactic Ambassador
![](images/avatars/42.jpg)
Joined: 06 Oct 2014 Posts: 2948 Location: Buffalo, NY
|
Posted: Wed Apr 04, 2018 4:44 pm Post subject: |
|
|
This really is a good sized model!
Looks like it's going well! _________________ There comes a time, thief, when gold loses its lustre, and the gems cease to sparkle, and the throne room becomes a prison; and all that is left is a father's love for his child. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Wed Apr 04, 2018 9:00 pm Post subject: |
|
|
A coat of primer.
I think it worked ok so far.
The cockpit is mostly done.
![](https://i.imgur.com/K0qTRSth.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Fri Apr 06, 2018 4:48 pm Post subject: |
|
|
The CM is built.
The fit is good so far. I don't think much putty will be needed.
You can see inside the cockpit very well.
Again, this is a BIG kit!
![](https://i.imgur.com/gB4DUDEh.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Gord Green Galactic Ambassador
![](images/avatars/42.jpg)
Joined: 06 Oct 2014 Posts: 2948 Location: Buffalo, NY
|
Posted: Sat Apr 07, 2018 12:59 am Post subject: |
|
|
Looks great!
Just remember , before you take it out for it's maiden spin that you run through the checklist! Be safe!
![](https://i.imgur.com/gCYSOpL.gif) _________________ There comes a time, thief, when gold loses its lustre, and the gems cease to sparkle, and the throne room becomes a prison; and all that is left is a father's love for his child. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Tue Apr 10, 2018 8:29 am Post subject: |
|
|
Gord,
Thats a nice graphic! Where did you find it?
But all the steps for the walk around are blank!
And the walk around would have to be accomplished
while wearing a space suit. That would limit the depth
of the check.
I'm assuming that the eagle has a complete self test system
to limit the exposure of the crew to hard vacuum. Also
the standard passenger pod has no airlock. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Gord Green Galactic Ambassador
![](images/avatars/42.jpg)
Joined: 06 Oct 2014 Posts: 2948 Location: Buffalo, NY
|
Posted: Tue Apr 10, 2018 3:00 pm Post subject: |
|
|
I found it on this site :
http://www.starbase79.com/space2.htm
Look around it using the bar on the left....LOTS of great bluprints, manuels, letterheads etc. from a host of great shows!
As bad as some SPACE;1999 stories may have been the ships and other tech were outstanding!
As much as I love the EAGLE as an all purpose spacecraft I absolutely love the HAWK...
One of the best, realistic fighters i've ever seen!
I have the smaller model in my "Hall of Fame" display models I've done. _________________ There comes a time, thief, when gold loses its lustre, and the gems cease to sparkle, and the throne room becomes a prison; and all that is left is a father's love for his child. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Tue Apr 10, 2018 6:46 pm Post subject: |
|
|
Agreed!
I have the new R2 1/72 hawk on preorder.
I have 2 of old MPC kits on display.
Thanks for the link, I'll check it out. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Gord Green Galactic Ambassador
![](images/avatars/42.jpg)
Joined: 06 Oct 2014 Posts: 2948 Location: Buffalo, NY
|
Posted: Thu Apr 12, 2018 8:48 pm Post subject: |
|
|
I am so impressed!
Lovely build......Bet this will be a showpiece when done! _________________ There comes a time, thief, when gold loses its lustre, and the gems cease to sparkle, and the throne room becomes a prison; and all that is left is a father's love for his child. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Sat Apr 21, 2018 8:19 am Post subject: |
|
|
Thanks!
I'm still working on the eagle. Life has a way of taking me
away from the build.
The cages are done:
Steely eyed readers will note one big mistake on my part.
The top tubing on the front cage is mounted backwards. The locater pins are facing the passenger pod rather than the CM.
I'm having to drill new locator holes for the spine and I'll trim the pins off soon.
Speaking of the spine:
It's done.
Lots of pieces here. Each horizontal cross bar is an ndividual piece. It seems very strong at this point.
The passenger pod main construction is complete now. I have the metal parts pack, I'll leave those off until painting is complete.
![](https://i.imgur.com/ugGrWY4h.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bud Brewster Galactic Fleet Admiral (site admin)
![](images/avatars/3.jpg)
Joined: 14 Dec 2013 Posts: 17183 Location: North Carolina
|
Posted: Sat Apr 21, 2018 9:47 am Post subject: |
|
|
________________________________
She's coming along nicely! I'm looking forward to the next installment. ![Cool](images/smiles/icon_cool.gif) _________________ ____________
Is there no man on Earth who has the wisdom and innocence of a child?
~ The Space Children (1958) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Sat Apr 21, 2018 6:56 pm Post subject: |
|
|
Thanks.
I've started the gear pods.
9 parts each. I have to be careful here. The orientation of the parts is very important.
I've built the 2 front pods. The instructions have a good map in them to help with the locations.
I wont get to the rear pods for a few days. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mach7 Quantum Engineer
Joined: 23 Apr 2015 Posts: 358
|
Posted: Thu Apr 26, 2018 1:07 pm Post subject: |
|
|
All the gear pods are built.
Each pod is specific to one corner. Numbering them helped me.
I've started on the main motors.
Soon I'll have to start on the snake pit that is the
main motor plumbing. That should be fun. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|